Calibrated measuring instruments to keep every component within drawing tolerances.
| Sr. No | Description | Qty |
|---|---|---|
| 01 | Inside Micrometer (0-800mm) | 01 |
| 02 | External Micrometer (0-800mm) | 08 |
| 03 | Bore Gauge (50-400mm) | 01 |
| 04 | Vernier Height Gauge (0-1000mm) | 01 |
| 05 | Vernier Depth Gauge (0-600mm) | 02 |
| 06 | Vernier Depth Gauge (0-300mm) | 03 |
| 07 | Vernier Caliper (0-2000mm) | 02 |
| 08 | Vernier Caliper (0-1000mm) | 03 |
| 09 | Vernier Caliper (0-600mm) | 04 |
| 10 | Vernier Caliper (0-300mm) | 04 |
| 11 | Plunger Type Dial Gauge (0-10mm) | 03 |
| 12 | Radius Gauge | 04 |
| 13 | Thread Plug Gauge | 02 |
| 14 | Surface Comparator Chart | 01 |
Lathes, horizontal boring mills, vertical machining centres and a boring machining centre for large and heavy components.
← Swipe left / right to see full table →
| Machine No. | Name of the Machine | Make | Specifications |
|---|---|---|---|
| 01 | Lathe M/C | Rajendra Geared M/C, Both Side Chuck | Admit between centre = 10,000 mm, Centre height = 1016 mm, Chuck dia = 1524.2 mm, Max dia clamping = 1900 mm, Chuck 2 dia = 1219.2 mm, Max swing = 2000 mm |
| 02 | Lathe M/C | Sound All Geared | Admit between centre = 7200 mm, Centre height = 660.4 mm, Chuck dia = 1066 mm, Max swing = 1250 mm |
| 03 | Lathe M/C | Rajendra | Admit between centre = 6000 mm, Centre height = 660.4 mm, Chuck dia = 1066 mm, Max swing = 1250 mm |
| 04 | Lathe M/C | Rajendra | Admit between centre = 4000 mm, Centre height = 700 mm, Chuck dia = 1219 mm, Max swing = 1360 mm |
| 05 | Lathe M/C | Skoda SR1000 | Admit between centre = 8000 mm, Swing over bed = 1000 mm, Over saddle = 700 mm, Chuck dia = 1000 mm |
| 06 | HBM-01 Horizontal Boring Mill | San Rocco (Italy) | Spindle dia = 120 mm, Table size = 1500 mm x 1200 mm, X = 2000 mm, Y = 1500 mm, Z = 2000 mm, With DRO, Max load = 6 tonnes |
| 07 | HBM-02 Horizontal Boring Mill | San Rocco (Italy) | Spindle dia = 100 mm, Table size = 1500 mm x 1500 mm, X = 2000 mm, Y = 1500 mm, Z = 2000 mm, With DRO, Max load = 10 tonnes |
| 08 | HBM-03 Horizontal Boring Mill | San Rocco (Italy) | Spindle dia = 140 mm, Table size = 2800 mm x 1500 mm, X = 2700 mm, Y = 2000 mm, Z = 2000 mm, With DRO, Max load = 15 tonnes |
| 09 | VMC-01 Vertical Machining Centre | KAFO (Taiwan) | X = 2000 mm, Y = 1000 mm, Z = 900 mm, 30 ATC, Through coolant geared spindle, Max load = 4 tons |
| 10 | VMC-02 Vertical Machining Centre | Hartford (Taiwan) | X = 2000 mm, Y = 1500 mm, Z = 900 mm, Max load = 6 tons |
| 11 | VMC-03 Vertical Machining Centre | AWEA (Taiwan) | X = 5000 mm, Y = 2500 mm, Z = 1000 mm, Max load = 18 tons |
| 12 | BMC-01 Boring Machining Centre | Femco (Taiwan) | X = 2000 mm, Y = 1800 mm, Z = 1700 mm, Max load = 6.3 tons |
Imported overhead cranes in both units for safe handling of heavy jobs.
| Sr. No | Name | Capacity |
|---|---|---|
| 01 – Unit 1 | Overhead crane (imported) | 15T x 2 nos. |
| 02 – Unit 2 | Overhead crane (imported) | 40T x 1 nos. 15T x 1 nos. 10T x 1 nos. |
Asian Compressor – 20 HP
40 kVA and 63 kVA Kirloskar